Advanced Keys AK-PSB05 Installationsanleitung PDF herunterladen (Seite 15)

16 VDC

≤ 20mA @ 12 VDC

≤ 80mA@12VDC

-25°C +85°C

Installer of this system to is requested to fill out the following information as a proof of installation to

the end-user of this system. For manufacture warranty to take immediate effect please request the

end-user to update the following information at: http://www.advancedkeys.com/registration.htm

• Connecting the wire harnesses and power ON the controller, check and confirm system operations

(Refer to Ignition Test and Troubleshooting) verify functions of the vehicle are in working order.

• Make sure all wiring connection are insulated properly. Place and secure control units to locations

inside trim panels and bundle all lose wiring. Put back all trim panels

• When mounting the controller unit in the vehicle, consider the location carefully. You should make

sure that you avoid any location where the controller is exposed to moisture, extreme heat or

interfere with moving parts on the vehicle which hampers driving.

• Explain all functions related to the end-user of this system.

CLOSING UP

REFERENCES INFORMATION

PRODUCT SPECIFICATIONS

PRODUCT REGISTRATION

Company / Installer Name:

Phone Number:

Installer Address:

Date of Installation:

Vehicle Manufacture:

Model:

Year:

Interface/Bypass Module Used:

If YES specify bypass make/model/firmware version:

Steering Column Lock Bypassed:

If YES specify bypass method used:

System Ignition Mode:

System Enabled by:

Reviewed Product Operation with End-User:

Remote Start Function Enabled:

If YES is Neutral Safety Switch tested and working?

Additional Comments:

YES NO YES NO

YES NO

Tested and Working Not Tested

Tach Tachless

Smart Key Third Part Device

YES NO

1 2 ... 10 11 12 13 14 15

Keine Kommentare

Advanced Keys AK-PSB05 Installationsanleitung Seite 15