Advanced Keys AK-PSB05 Installationsanleitung PDF herunterladen (Seite 11)

To Accessory

To Ignition (ON 2)

To Ignition (ON 1)

To Starter

Push-Start

Controller

ACC (+)

YELLOW

14AWG

(IGNITION 2) ON 2 (+)

(IGNITION 1) ON 1 (+)

STARTER (+)

WHITE 14AWG

BLUE 14AWG

GREEN 14AWG

To Battery (+)

Ignition

Switch

RED 14AWG

Battery +12V (+)

Disconnect ACC to allow shaved-key to

stay in the cylinder without discharge the

battery. Adding an enable/disable switch

for ACC function if desired. (Optional)

STEERING COLUMN LOCK BYPASS

To achieve complete keyless ignition, OEM steering column lock anti-theft feature needs to be

bypassed. We do not recommend disabling the steering column lock permanently by removing the

this function:

1. Have a local locksmith duplicated a factory key.

Note: Do not modify factory keys, it is not required. Duplicate the key blade only not the RF chip inside.

2. Mark on the key when it is fully inserted into the key cylinder.

3. With the help of pliers and cutter, shave off the key above the marking.

4. Insert the shaved key into the key cylinder and switch to ACC position.

5. Optionally, cover the key cylinder with optional key cover to conceal the key cylinder.

6. Bypass vehicle ACC and Keysense input as shown in the following Wiring Diagram.

2 3

Follow the wiring diagram below and connect Push-Start Module outputs to the Ignition wiring:

IGNITION WIRING DIAGRAM

This wiring method also taking into consideration that a shaved-key has been used in ACC position for

steering lock bypass. Disconnect the ACC input to the vehicle so shaved-key left in the key cylinder's

ACC position does not consume vehicle battery. To retain the full functionality of the key cylinder, add a

toggle or latch switch (not included) at the ACC disconnect. This switch allows manual enable /

disable the ACC input to the vehicle.

To bypass the Push-Start system and operate the vehicle with OEM key, close the switch to enable

ACC and remove the shaved-key from the key cylinder and insert OEM key to operate the vehicle

normally.

Note: There are multiple ways to bypass steering column. Advanced Keys does not recommend permanent disabling

the mechanism and is not responsible for any damage, theft and accidents which could result from steering

lock bypass modification in any ways or forms.

1 2 ... 6 7 8 9 10 11 12 13 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Advanced Keys AK-PSB05 Installationsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kfz-Elektronik Advanced Keys AK-PSB05