Advanced Keys AK-PSB05 Installationsanleitung PDF herunterladen (Seite 7)

Review product manual

manual. Prepare vehicle

for installation.

Review and set

controller jumper

settings according to

requirements.

Connect Main and

Accessory Harness.

Pre-position antennas

and antenna wiring.

Power ON the system

and set programmable

features.

Verify smart keys and

bypass transponder card

function/range then route

and secure antennas to

final position.

Mount LED, secure

controller and close-up

installation.

INSTALLATION

Use following steps as a guide to install this system:

INSTALLATION NOTES

• For vehicles equipped with factory or aftermarket alarm/remote start, it is

possible to install this system without the anti-theft alarm and remote start

functions. (Refer to User Manual on how to disable Alarm Function) Connect

BATTERY, GROUND, LOCK, UNLOCK, ACC, BRAKE and ANTENNAS for

Smart Keyless Entry function only.

• Ensure the ACC(+) input is connected. It is required for remote-start function

Avoid leaving the Smart Key inside or near the detection range for extended

periods of time, for it will remain in constant communication with the controller

• It is recommended to connect the DOOR SWITCH input to the vehicle. This

system will have a better remote sensing performance when it is aware of the

door status.

PROGRAMMABLE FEATURES

Horn or Siren Mode

locking or

unlocking. Horn output will only sound in alarming and programming mode. If the

Horn Output

Siren Output

Parking Light

Unlock

2 x

Lock

1 x

Remote Start

1 x

INSTALLATION OVERVIEW

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Advanced Keys AK-PSB05 Installationsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kfz-Elektronik Advanced Keys AK-PSB05