Advanced Keys AK-PSB05 Installationsanleitung PDF herunterladen (Seite 11)

Controller operating voltage range: .................................................................................... 10 VDC 16 VDC

Controller Stand by power: ................................................................................................. ≤ 30mA @ 12 VDC

Avg. controller operating power: ........................................................................................... ≤ 80mA@12VDC

Devices operating temperature range: ..................................................................................... -25°C +85°C

Transmitter operating voltage range: ...................................................................................... 2 VDC 4 VDC

Transmitter Stand by power: ................................................................................................... ≤ 7 µA @ 3 VDC

HF operation frequency and range: ............................................................... 433.92MHz @ 25 -30 Meters

LF operation frequency and range: .................................................................... 134.2 KHz @ 1.5 -2 Meters

Smart Key Fob Dimensions: ................................................................................. 65mmL x 44mmW x 6mmH

Base Controller Dimensions: ........................................................................... 115mmL x 90mmW x 30mmH

Installer of this system to is requested to fill out the following information as a proof of installation to

the end-user of this system. For manufacture warranty to take immediate effect please request the

end-user to update the following information at: http://www.advancedkeys.com/registration.htm

• Connecting the wire harnesses and power ON the controller, check and confirm system operations

(Refer to User Manual) then verify functions of the vehicle are in working order.

• Make sure all wiring connection are insulated properly. Place and secure control units to locations

inside trim panels and bundle all lose wiring. Put back all trim panels

• When mounting the controller unit in the vehicle, consider the location carefully. You should make

sure that you avoid any location where the controller is exposed to moisture, extreme heat or

interfere with moving parts on the vehicle which hampers driving.

• Explain all functions related to the end-user of this system.

CLOSING UP

REFERENCES INFORMATION

PRODUCT SPECIFICATIONS

PRODUCT REGISTRATION

Company / Installer Name:

Phone Number:

Installer Address:

Date of Installation:

Vehicle Manufacture:

Model:

Year:

Front Antenna Location:

Rear Antenna Location:

Bypass Antenna Location:

Interface/Bypass Module Used:

If YES specify bypass make/model:

All Smart Keys and Bypass Cards Working:

Push-Start Module Installed:

Antenna Mounted on Windshields:

Reviewed Product Operation with End-User:

Additional Comments:

YES NO

1 2 ... 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Advanced Keys AK-PSB05 Installationsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kfz-Elektronik Advanced Keys AK-PSB05